Rear seat cover unhooks - AF91.12-P-2002A

MODEL 203 up to 30.4.01 

MODIFICATION NOTES

7.5.01

Supersedes STIP 91.12-005 dated 04.05.2001

Damage code	Cause	Remedy
92 004 38	Clamping effect in hook-in channel on cushion frame too small.	In 1/3 seat surface: ↓
	Rear seat cover can unhook under load.	1 Install two additional clamps in front hook-in channel
		2 Hook seat cover in again.
		In 2/3 seat surface: ↓ 3 Install three additional clamps in front hook-in channel.
		4 Hook seat cover in again.
		In the event of complaint install all five clamps.
		Production break-point for clamps as of production May/01

PARTS ORDERING NOTES

Part no.	Designation	Quantity
A 007 988 55 78	Clamps	As required