Fuel injection and ignition system (ME-SFI ) diagnosis previous knowledge - AD07.61-P-2000D
ENGINES 111.921 /942 as of 1.9.98, 111.943, 111.944 as of 1.8.96, 111.946 as of 1.6.98, 111.947 /973, 111.975 as of 1.8.96
ENGINE 111.945 in MODELS 208.335 /435 as of 1.6.98, 202.020 /080 as of 1.9.98
ENGINE 111.974 with CODE (494a) USA version with CODE (807) Model year 1997 with CODE (808) Model year 1998
| Hazard from contact with parts conducting high voltages. | Do not touch parts which conduct high voltages. Persons who wear electronic implants (e.g. heart pacemakers) must not carry out work on the ignition system. | AS15.10-Z-0001-01A | |
| Lethal Hazard from being drawn into rotating vehicle parts | Do not reach into rotating parts. Wear closed and close-fitting work clothes. Secure area of rotating vehicle components against unauthorized access. |
AS00.00-Z-0004-01A | |
| Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel. | No fire, sparks, naked flames or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel. |
AS47.00-Z-0001-01A | |
| Notes on avoiding damage to ignition system | Engines 104, 111, 112, 113, 119, 120 with ME-SFI fuel injection and ignition system | AH15.10-P-0002-01D | |
| When removing the connectors from the MESFI control module, remove the center connector first and connect center connector D last when reconnecting. | |||
| Fuel injection and ignition system (ME-SFI ) component locations | Model 170 | GF07.61-P-0001-01G | |
| Models 202/208 | GF07.61-P-0001-01H | ||
| Model 210 | GF07.61-P-0001-01J | ||
| Electric wiring diagrams | Models 170, 202, 208 groups 07 and 00 | PE07.00-P-1100B | |
| Connection and use of testing equipment | AD00.00-P-1000AZ | ||
| Connect hand-held tester (HHT), read out diagnostic trouble code memory | AD00.00-P-2000-03A | ||
| Diagnostic trouble code memory information | AD07.61-P-2000-10E | ||
| Notes on ME-SFI fuel injection and ignition system HHT | AD07.61-P-2000-04A | ||
| Fuel injection and ignition system electrical testing tools | AD07.61-P-2000-06B | ||
| Socket box connection diagram, ME-SFI , testing of electrical system | AD07.61-P-2000-01A | ||
| Connector assignment, ME-SFI fuel injection and ignition system | AD07.61-P-2000-02D | ||
| ME-SFI fuel injection system signal former | AD07.61-P-2000-03B | ||
| Ignition system signal former | AD07.61-P-2000-07E | ||
| Fuel pressure hydraulic testing tools | AD07.61-P-2100-01A | ||
| Fuel pressures test connection | AD07.61-P-2100-02D | ||
| Connecting socket box, fuel pump testing | AD07.61-P-2200-02D | ||
| Fuel pump hydraulic testing tools | AD07.61-P-2200-01B | ||
| Connecting socket box, fuel injector testing | AD07.61-P-2300-02D | ||
| Fuel injection valve hydraulic testing tools | AD07.61-P-2300-01B | ||
| Test wiring harness for fuel injection valve testing | WF58.50-P-0761-01A | ||
| Checking fuel injection valves, spray pattern | AD07.61-P-2300-03B |