Determine oil consumption Test sheet for excessive oil consumption, form - SM18.00-P-0002-01A

OIL PAN

Weigh engine oil (after consumption measuring drive): 

The customer visits the workshop due to an oil level warning message.

1. Weigh empty oil container ("TARE").
2. Put vehicle on lifting platform when oil temperature is 90°C.

   The waiting time of 15 min begins when the engine is switched off.

3. Open oil filler cap and pull oil filter.
4. Remove under-ride guard and open oil drain screw.
5. Drain engine oil into oil container and tighten oil drain screw again.

   Observe the waiting time of 15 min (see operation step 2).

6. Place filled oil container on scales and weigh.
7. Determine oil consumption in the way described on test sheet.