Use of metal dust remover - AP98.00-P-0636A

MODEL 124, 126, 129, 140, 163, 168, 170, 201, 202, 203, 208, 209, 210, 211, 215, 220, 230, 240 

MODEL 461.302 /332 /342 /345 

MODEL 463 

	Application
1	Wash the vehicle	Then dry the vehicle.
2	Cover door handles, windshield washer nozzles, windshield wipers and headlamp wipers
	Risk of injury  caused by caustic burns due to contact with metal dust remover.	Avoid contact. Wear tight-fitting safety glasses and acid-resistant gloves.	AS98.00-Z-0003-01A
3	Apply metal dust remover and rub in under light pressure	Coat with a rag or soft brush for cleaning all painted surfaces and plastic parts. The metal dust remover gets rid of metal dust (flash rust) from the paint by a chemical reaction. Do not use metal dust remover for routine car washes or for cleaning other forms of dirt. Only use in temperatures up to maximum 25 °C. Do not clean the vehicle in direct sunlight. Do not treat unpainted plastic parts with metal dust remover as the plastic may become discolored.	*BR00.45-Z-1017-04A
4	Leave the metal dust remover to act	Never extend the acting time otherwise the paint or the plastic parts may be attacked. Allow it to work in for a maximum of 10 min making sure that the metal dust remover does not dry. Treatment using a metal dust remover may be repeated if the cleaning effect is unsatisfactory.
5	Rinse off the vehicle with water
6	Wash the vehicle with car shampoo	Then dry the vehicle.	*BR00.45-Z-1002-04A
7	Polish the treated surface with polish and a polishing wad	Polish by hand. Depending on the condition of the paint surface, treat beforehand with a polishing machine (buffer), polishing paste and polish if necessary.	*BR00.45-Z-1013-04A
8	Apply gloss preserver	To protect the paintwork from the elements.	*BR00.45-Z-1014-04A