Draft from rear door liner - AF72.12-P-3100P

MODEL 203. 

Damage code	Cause	Remedy:
73 401 S8	When driving with sliding roof open, a vacuum forms in the passenger compartment. This causes air to be sucked out of the hollow cavities in the body through the opening in the door liner into he passenger compartment, causing a draft.	1 Remove rear door liner.	AR72.12-P-1010P
		2 Disassemble door liner for rear door. Disassembly refers only to the components affected by this work power window switch strip, door opening lever, door handle).	AR72.12-P-1040P
		3 Seal rear door liner.	AF72.12-P-3100-01P
		4 Assemble door liner on rear door	AR72.12-P-1040P
		5 Mount rear door liner.	AR72.12-P-1010P

Fig 1: Identifying Area Of Front And Rear Door

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Fig 3: Identifying Torx Bit Set (000 589 01 10 00)

PARTS ORDERING NOTES

Part no.	Designation	Quantity
A220 682 07 08	Self-adhesive bonding foil (per door)	1
A203 737 21 30	Piece of foam rubber, left rear door	1
A203 737 22 30	Piece of foam rubber, right rear door	1
A203 682 04 31	Foil seal (self-adhesive)	As required