Noises in area of rear shelf - AF68.30-P-1121PG

MODEL 203.0## #A up to 038987 

MODEL 203.0## #F up to 021690 

Damage code	Cause	Remedy
69 243	Rear center plastic mount loose/or broken.	1 Remove rear shelf	AR68.30-P-4580P
		2 Glue felt (1) to rear shelf at side between plastic mount (2) and reinforcement plate (3).
		3 Replace loose or damaged plastic mount (4) on rear wall For plastic mount see parts ordering notes.
		4 Connect loudspeaker cable to loudspeaker at bottom. The loudspeaker cables should not contact the installed rear shelf.
		5 Install missing clips (5) on backrest release cable in trunk on left and right. For clips see parts ordering notes
		6 Install rear shelf	AR68.30-P-4580P

Fig 1: Identifying Area To Glue Felt, Plastic Mount And Reinforcement Plate

Fig 2: Identifying Plastic Mount On Rear Wall

Fig 3: Identifying Missing Clips On Backrest