Removing/installing the tumble flap position sensor on intake manifold (engine 272) - AR09.20-P-1995V
ENGINE 272.942 in MODEL 171.454
ENGINE 272.963 in MODEL 171.456
| Removing/installing | |||
|---|---|---|---|
| 1 | Turn key in ignition switch to position "0". | ||
| 2 | Open engine hood | AR88.40-P-1000V | |
| 3 | Remove air filter housing | AR09.10-P-1150VA | |
| 4 | Separate the electrical connectors (12) | ||
| 5 | Unscrew bolts (11). | *BA09.20-P-1002-01N | |
| 6 | Withdraw left and right tumble flap position sensor for intake manifold (B28/9, B28/10) out of resonance intake manifold (2) | ||
| 7 | Install in reverse order |
INTAKE MANIFOLD
| Number | Designation | Engine 272 | |
|---|---|---|---|
| BA09.20-P-1002-01N | Bolt for tumble flap position sensor on resonance intake manifold | Nm | 6 |