Information on application of sealant to bottom part of camshaft housing - AH05.20-P-6995-01QK
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
Application of sealant to bottom part of camshaft housing
The line (A) identifies the application of the sealant.
The sealant must be applied only to the specified surfaces with a bead of 2.0 mm ± 0.5 mm.
The sealant must be processed within 10 min.
The bead must not be spread.
Only the approved sealant may be used.