Remove/install cover on center console - AR68.20-P-2350V

MODEL 171.4 

Fig 1: Identifying Center Console Cover Components

Courtesy of MERCEDES-BENZ USA

Shown on vehicle with transmission 722 

	Remove/Install
1.1	Loosen gearshift lever cover	Transmission 716.6 Do not loosen clamping piece	AR68.20-P-2310V
1.2	Loosen selector lever handle with cover (2)	On transmission 722 Do not loosen clamping piece and do not disconnect connector.	AR27.60-P-0905VA
2.1	Move gearshift lever to center position	Transmission 716.6
2.2	Move selector lever into position "N"	On transmission 722
3	Pull parking brake lever (3) all the way up
4	Reach into rear center console cover (1) (arrow) and unclip upward	Installation:  First insert guides (6) for center console cover (1) into center console at front
5	Lay center console cover (1) to side while guiding selector lever handle with cover (2) or gearshift lever cover through
6	Unscrew bolts (4) and remove outside rearview mirror adjustment switch with/without mirror fold-in/out feature (S50/1) and Vario roof/ATA switch group (S84)	Do not disconnect electrical connectors (5).
7	Remove center console cover (1) from vehicle
8	Install in the reverse order