Remove/install paneling on rear section of Vario roof - AR68.30-P-4380V

MODEL 171.4 

Fig 1: Identifying Panel And Catch Lugs

Courtesy of MERCEDES-BENZ USA

	Remove/Install
	Risk of injury  from pinching  or squeezing  when working on partially open Vario roof (stop mode) or in its closing area as a result of the Vario roof suddenly collapsing	Secure Vario roof with a suitable special tool.
1	Move Vario roof into intermediate position and secure	Position of C-pillar approx. 90°.	AR77.50-P-3000-01V
			Figure
2	Unclip paneling (1) from rear window frame on catch lugs (2) with mounting wedge	Installation:  Ensure that associated retaining clips are seated properly on rear window frame.	Figure
3	Remove paneling (1) from rear window frame
4	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Support (230 589 04 63 00)

Courtesy of MERCEDES-BENZ USA