"CHECK ENGINE" MIL, location/task/function - GF54.30-P-4101AM
MODEL 211, 219 with ENGINE 113.990 with CODE (494) USA version
MODEL 215, 220 with ENGINE 113.991 with CODE (494) USA version
MODEL 230 with ENGINES 113.992 /995 with CODE (494) USA version
MODEL 463 with ENGINE 113.993 with CODE (491) USA version
Shown on MODEL 211, 219
| "CHECK ENGINE" malfunction indicator lamp, location | The indicator lamp is located in the instrument cluster (A1). | ||
| "CHECK ENGINE" malfunction indicator lamp, task | The indicator lamp signals faults relevant to exhaust emissions to the driver. | ||
| "CHECK ENGINE" malfunction indicator lamp, function | The indicator lamp is actuated by the ME-SFI [ME] control unit (N3/10) at the ground end when the engine is started. If there is no fault, the motor electronics control unit interrupts the actuation and the indicator lamp goes out. To check the bulb function it lights up for approx. 1 second when the ignition is switched "ON". |