Remove/install front seat - AR91.10-P-1000RBS (Black Series)

MODEL 230.4 

- with CODE (P99) "AMG Black Series" special model 

- except CODE (494) USA version 

Fig 1: Removing/Installing Front Seat - Black Series

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Move steering wheel forward and up
2	Switch off the ignition and remove the transmitter key from the EIS control unit	On vehicles with code (889) Keyless-Go, press KEYLESS-GO start/stop button repeatedly until ignition is switched off. Remove the transmitter key from the vehicle and store it in a location beyond its transmission range (at least 2 meters).
3	Move seat (1) forwards
4	Disconnect electrical connector (2)
5	Remove bolts (3)		*BA91.10-P-1007-01A
6	Move seat (1) backwards
7	Remove bolts (4)		*BA91.10-P-1007-01A
8	Move seat (1) to center position and remove	Cover door sill with protective cover.
9	Install in the reverse order