Remove/install paneling on A-pillar - AR68.30-P-4050R

MODEL 230.4 

Fig 1: Identifying Paneling On A-Pillar Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Unclip paneling (1) from mounting clips (3) on A-pillar (2) with mounting wedge and remove.	Installation:  Check whether mounting clips (3) on A-pillar (2) and retaining clips (4) on rear side of paneling (1) are seated tightly or damaged, replace if necessary.
			Figure
2	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA