Retrofitting CD changer in stowage compartment - AZ82.64-P-0001-04R

For stowage compartment in left rear. 

1. Tie connector (2) for power supply line (3) out of standard wiring harness and lay into recess.

   Standard wiring harness is routed along rear wall (see arrows).

   Fig 1: Identifying Power Supply Line And Connector

   Courtesy of MERCEDES-BENZ USA
2. Connect D2B fiber optic cable (1) and power supply line (3) to CD player with changer (A2/6).
3. Clip D2B fiber optic cable (1) on CD player with changer (A2/6) into catch (see arrow).
   Fig 2: Identifying D2B Fiber Optic Cable And CD Player With Changer

   Courtesy of MERCEDES-BENZ USA
4. Put CD player with changer (A2/6) in bracket (4) and fasten with 4 screws M4x6 (9).

   Do not kink or stretch fiber optic cables! 

5. Fasten mount (4) on cross member with plastic plug (5).
   Fig 3: Identifying CD Player With Changer, Bracket And Cross Member With Plastic Plug

   Courtesy of MERCEDES-BENZ USA
6. Unclip cover (6) from stowage compartment (7) (catch hook, see arrows).

   Cover (6) is eliminated part!

   Fig 4: Identifying Stowage Compartment And Cover

   Courtesy of MERCEDES-BENZ USA
7. Install stowage compartment (7) above CD player with changer (A2/6).
8. Insert privacy screen (8) above CD player with changer (A2/6) (new part).
9. Fasten privacy screen (8) to stowage compartment (7) with 2 sheet metal screws (10) (holes prepunched).
   Fig 5: Identifying Stowage Compartment, Privacy Screen And CD Player With Changer

   Courtesy of MERCEDES-BENZ USA