LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2005 >> SL500 >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Fuel & Ignition -- Self-Diagnostic System -- 230 Chassis >> Self-Diagnostic System >> Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000 >> ME-SFI fuel injection and ignition system (ME), DTC memory - AD07.61-P-4000M >> CAN fault detection ME-SFI - fault code description - AD07.61-P-4000-32MC

CAN fault detection ME-SFI - fault code description - AD07.61-P-4000-32MC

1A Fault code ME2.7.1 
(Fault code according to OBD)		 P2036 CAN message from ESP, SPS [PML] and BAS control unit (N47-5) missing or faulty (P0600)
1B Fault code ME2.7.2 
(Fault code according to OBD)		 P2036 CAN message "Switch-off time" from instrument cluster missing or faulty (P0600)
2 Fault storage After expiry of test duration and fault
  Actuation of the indicator lamp  
 
  • Engine diagnosis (EURO4)
  • No actuation
 
  • CHECK ENGINE (MIL) USA ONLY
  • Following two successive drive cycles with faults
3 Checking frequency Continuous
4 Checked signal or status The information exchange to the engine control unit is monitored.
  Checking duration Approx. 10 seconds
scientia non olet · About LEMON Manuals