Parking brake pedal assembly modified - BT42.20-P-0510-01A
MODELS 129, 140, 163, 202, 203, 208, 209, 210, 211, 215, 220, 230, 240
Modified pedal assembly
Phased in as of approx. 09/2002 a modified design of parking brake pedal systems (1) have been fitted.
The new version of the pedal assembly (1) has a pulled notch (2a) instead of a pushed notch (2b) as previously.
This results in different values for the adjustment of the parking brake.
On account of the successive production launch and the possibility that in the case of repair, that old replaces new or new replaces old, on each vehicle, the version of the pedal assembly (1) is determined before the parking brake is adjusted.
The new and previous version can be distinguished by the position of the shaft journal (3) in the pedal lever (4). Moreover the notches (2a, 2b) differ in color.
- Late type:
The shaft journal (3) of detent (2a) is mounted offset from the pedal lever center.
Color of notch (2a): light gray
- Previous version:
The shaft journal (3) of the notch (2b) is mounted centrally in the pedal lever (4).
Color of notch (2b): black