LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2005 >> SL500 >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Substructure -- Testing & Repair -- 230 Chassis >> Testing & Repair >> Remove/install bottom engine compartment paneling - AR61.20-P-1105R

Remove/install bottom engine compartment paneling - AR61.20-P-1105R

MODEL 230 except CODE (P99) "AMG Black Series" special model 

Fig 1: Identifying Bottom Engine Compartment Paneling Components - Model 230
G04715803Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install    
DANGER Risk of death  caused by vehicle slipping or toppling off of the lifting platform. Align vehicle between the columns of the and position the four support plates below the lifting platform support points specified by the vehicle manufacturer. AS00.00-Z-0010-01A
1 Lift vehicle with two-post lift    
    Two-post lift *WE58.40-Z-1001-05A 
2 Unscrew bolts (1) from engine compartment paneling below engine (B) and remove paneling.    
3 Unscrew bolts (1) from engine compartment paneling below transmission (C) and remove paneling.    
4 Unscrew bolts (1) from center front engine compartment paneling (A) and remove paneling.    
5 Unscrew bolts (1) from left front engine compartment paneling (A1) and right front engine compartment paneling (A2)    
6 Remove left front engine compartment paneling (A1) and right front engine compartment paneling (A2)    
7 Install in the reverse order    
WORKSHOP EQUIPMENT

WE58.40-Z-1001-05A Two-post lifting platform