Remove/install telescoping nozzle for headlamp cleaning system - AR82.15-P-6100RBS (Black Series)

MODEL 230.4 with CODE (P99) "AMG Black Series" special model 

Fig 1: Removing/Installing Telescoping Nozzle For Headlamp Cleaning System - Black Series

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove front bumper	When removing the left and right telescopic nozzle (1).	AR88.20-P-2000RBS
2	Detach cooler for low-temperature water circuit at left or right	Model 230.479 with engine 275.983 Do not disconnect any lines.	AR09.41-P-6935RBS
3	Detach retaining clamp (2) and remove washer fluid hose (3) from telescopic nozzle (1)	Collect washer fluid which flows out.
4	Remove bolts (4)
5	Remove telescopic nozzle (1) forwards	Installation:  Ensure that guide pin (5) is properly seated in crossmember (6).
6	Install in the reverse order
7	Fill washer fluid reservoir		AP82.35-P-8210N