Remove/install lamp unit - AR82.10-P-4730RBS (Black Series)
MODEL 230.4 with CODE (P99) "AMG Black Series" special model
| Remove/install | |||
|---|---|---|---|
| Risk of death
caused by high voltage levels present at xenon headlamps. Risk of explosion/fire due to highly flammable materials in the area of damaged xenon bulbs Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters when xenon bulbs are bursting Risk of poisoning due to inhaling mercury vapors and when swallowing/coming in contact with toxic salts and mercury compounds |
Do not come into contact with parts that are under high voltage. Persons with active electronic implants (e.g. heart pacemakers) must never work on xenon headlamps. Switch off entire lighting system. Wear insulating safety shoes, safety glasses, and protective gloves. Remove highly inflammable materials from the hazard area. Ensure that the working area is sufficiently ventilated. | AS82.10-Z-0001-01A | |
| 1 | Switch off the ignition and remove the transmitter key from the EIS control unit | ||
| 2 | Remove front bumper | AR88.20-P-2000RBS | |
| 3 | Remove screw/bolt (1) and screws/bolts (2) of left front lamp unit (E1) or right front lamp unit (E2) | ||
| 4 | Remove left front lamp unit (E1) or right front lamp unit (E2) forwards until electrical connector (3) is accessible | ||
| 5 | Disconnect electrical connector (3) and remove left front lamp unit (E1) or right front lamp unit (E2) | ||
| 6 | Install in the reverse order | ||
| 7 | Code left front lamp unit (E1) or right front lamp unit (E2) with Star Diagnosis | Only when replacing left front lamp unit (E1) or right front lamp unit (E2). | |
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| 8 | Check and correct the adjustment of the headlamps | AP82.10-P-8260R |