LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2005 >> S600 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control -- Basic Knowledge -- 215 & 220 Chassis >> Basic Knowledge >> REST button, function - GF83.40-P-2109 >> REST button, function - GF83.40-P-2109-01N

REST button, function - GF83.40-P-2109-01N

Function 

The residual engine heat utilization system can be switched on by pressing the REST button (RESIDUAL HEAT ) on the automatic A/C pushbutton control module ("REST" appears on display).

When the engine is switched off the residual heat is used to heat the passenger compartment depending on the temperature set on the automatic A/C pushbutton control module and the ambient temperature.

Heating is possible for approx. 30 minutes after shutting off the engine. This function is possible only with the ignition switched off or with the ignition lock in position 1. If the voltage is too low the residual engine heat utilization feature is switched off automatically. The flaps are in the automatic mode and the air quantity is also adjusted automatically.

The residual engine heat utilization function is switched off:

scientia non olet · About LEMON Manuals