Trunk lid lock, function - GF80.20-P-4103-01S

Model 215, 220 

The lock cylinder for the trunk lid lock is connected to the latch mechanically by a rod. The lock can be opened pneumatically with the pneumatic actuator or mechanically with the rod. The trunk lid closing assist locking eye microswitch (S88/3)  is read in by the rear SAM control module (N10/8)  . The state of the trunk lid closing assist locking eye microswitch (S88/3)  indicates whether the trunk lid is open or closed.

By moving the lock cylinder to the 0° position the remote trunk release switch (S15/1)  is actuated. The position of the switch is recognized by the PSE control module (combined) (A37)  .

The pneumatic cylinder unlocks the trunk lid by pressure. The trunk lid opens.

The trunk lid is not unlocked  when the lock cylinder is in the 90° position.

When the lock cylinder is moved to the 30° position the trunk lid is unlocked mechanically.

, only

The trunk lid lock switch (S88/2)  can be actuated with the manual key, thereby locking or unlocking the vehicle. The anti-theft alarm (ATA)  is also activated or deactivated.