Special signal system pushbutton control module, purpose - GF82.25-P-2101-02S
Signal switch (1) in position A
The blue light is actuated. The operating state of the left and right blue lights is indicated by the indicator lamps (2).
Signal switch (1) in position B
The blue light is actuated. The function of the left and right blue lights is indicated by the indicator lamps (2). If one of the fanfare horn (S110s5, S111s5) buttons is pressed momentarily a tone sequence cycle is transferred to the fanfare horns (H2) . It is possible to repeat this function as often as possible.
Signal switch (1) in position B and pulled
The optical and acoustic signal is permanently actuated.
The function of the right and left blue lights is indicated by the indicator lamps (2).
The optical signal can be triggered independently of the ignition. The acoustic signal sounds only with c. 15 and left blue light switched on.