LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2005 >> S600 >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft & Central Locking - 215 & 220 Chassis >> Basic Knowledge >> Unlocking by opening a door, function - GF80.20-P-3004S

Unlocking by opening a door, function - GF80.20-P-3004S

MODEL 220, 215 

It is always possible to open any of the doors from the inside  even when the vehicle is locked centrally. By opening the driver or passenger door from the inside the vehicle can be unlocked partially or completely in the following cases. 

Opening a door, shortly after locking 

If the driver or passenger door is opened within 10 seconds after locking with the remote control key, the PSE control module (combined) (A37)  unlocks pneumatically. The PSE control module (combined) (A37)  unlocks only selectively if the vehicle was unlocked selectively before locking.

Opening a door after locking with the remote control key (vehicle unlocked selectively) 

  1. Insert remote control key into ignition:

    The anti-theft alarm (ATA) is  deactivated and the interior switch released but the vehicle is not unlocked  .

  1. 2a. Opening driver's door:

    The PSE control module (combined) (A37)  unlocks selectively (driver's door and trunk lid)

  2. 2b. Opening passenger door:

    Driver's door and trunk lid are unlocked when the pump for the PSE control module (combined) (A37)  has been running for max. 20 seconds before opening the door.

Opening a door after locking with the remote control key (vehicle unlocked universally) 

  1. Insert remote control key into ignition:

    The anti-theft alarm (ATA)  is deactivated and the interior switch released but the vehicle is not unlocked  .

  2. Opening driver or passenger door:

    The PSE control module (combined) (A37)  unlocks the entire vehicle pneumatically.

Opening a door after locking with the interior switch, or following automatic locking 

  1. Opening driver's door:

    The PSE control module (combined) (A37)  unlocks the entire vehicle pneumatically corresponding to the status before locking, universal or selective.

  2. Opening passenger door:

    The PSE control module (combined) (A37)  unlocks the vehicle pneumatically if it was unlocked universally  before locking.

If selectively  unlocked before locking the driver's door and the trunk lid are only unlocked when the pump for the PSE control module (combined) (A37)  was operating for max. 20 seconds before opening the door.

IMPORTANT

  Locking/unlocking pneumatically, function   GF80.20-P-4016S 
  Automatic locking, function   GF80.20-P-4009S 
  Deactivation of anti-theft alarm (ATA), function   GF80.50-P-2003S 
  Pneumatic system equipment (PSE), combined functions, location/purpose/design/function   GF80.20-P-4106S