Keyless go control module, task - GF80.61-P-4102-02SM

The keyless go control module (N69/5) has the following purposes, explained using model 220 as an example:

• Control of lift solenoids in doors
• Control of keyless go inductive antennas
  • Rear bumper keyless go antenna (A2/31)
  • Left antenna element (A2/35a1)
  • Right antenna element (A2/35a2)
  • Left front door keyless go antenna (A2/38)
  • Right front door keyless go antenna (A2/40)
  • Left rear door keyless go antenna (A2/39)
  • Right rear door keyless go antenna (A2/41)
• Locate transmitter key (A8/1) inside or outside of vehicle via antenna system
• Read in keyless go trunk lid button
• Read in keyless start/stop button (S2/3)
• Read in pull contact microswitch in doors
• Read in pressure contacts for doors
• Read in capacitive sensors for doors

Peculiarities on model 215

Since model 215 does not have rear doors, microswitches, pressure contacts and capacitive sensors for the rear doors are eliminated The left rear door keyless go antenna (A2/39) and the right rear door keyless go antenna (A2/41) are replaced with left rear keyless go antenna (A2/39) and right rear keyless go antenna (A2/41) on model 215. However, the function is the same