Automatically controlled all-wheel drive (4MATIC), function - GF28.00-P-0001P

MODEL 203.081 /281, 211.080 /280 with TRANSMISSION 722.667 

MODEL 203.084 /284, 211.082 /282 with TRANSMISSION 722.668 

MODEL 211.083 /283, 220.084 /184 with TRANSMISSION 722.672 

MODEL 220.083 /183 with TRANSMISSION 722.671 

MODEL 220.087 /187 with TRANSMISSION 722.675 

MODEL 211.087 with TRANSMISSION 722.676 

All 4MATIC models as of model series 203 feature as standard the Electronic Stability Program (ESP)  as basic equipment. Also integrated is the electronic traction system (4ETS)  , which is specially modified for 4MATIC drive. This system replaces the mechanical interaxle and interwheel differential locks of traditional 4MATIC systems.

This reduces the manufacturing costs and the weight.

The fixed drive torque distribution is 40 % at the front axle and 60 % at the rear axle.

The drive torque is distributed to the drive axles (drive train) via a one-stage transfer case without off-road ratio.

	Drive train, function		GF28.00-P-2000P
	Transfer case oil feed, function		GF28.55-P-3000P
	Features of Electronic Stability Program (ESP) and electronic traction control (4ETS)		AH42.45-P-0001-01P
	Electronic Stability Program (ESP), function	Model 203	GF42.45-P-0001VC
	Electronic Stability Program (ESP), function	Model 211	GF42.45-P-0001T
	Electronic Stability Program (ESP), function	Model 220	GF42.45-P-0001V