Test values for distance and comparison measurements on rear axle - BE40.30-P-1000-05B
Models 129, 170, 171, 202, 203, 208, 209, 210, 211, 215, 220, 230
MODIFICATION NOTES
| 11.8.05 | Dimension H1, H2, H5, H8 and H9 | Model 203 |
TEST VALUES FOR DISTANCE AND COMPARISON MEASUREMENTS ON REAR AXLE
| Number | Designation | Model 129 | Model 170 | Model 171 | Model 202 | ||
|---|---|---|---|---|---|---|---|
| BE40.30-P-1001-05B | Dimension | H1 | mm | 4 | 4 | - | 4 |
| H2 | mm | 3 | 3 | 3 | 3 | ||
| H4 | mm | 4 | 4 | - | 4 | ||
| H5 | mm | 6 | 6 | 6 | 6 | ||
| H6 | mm | 1070 (± 2) | 1022 (± 2) | 1083 (± 2) | 1022 (± 2) | ||
| H7 | mm | 702 (± 2) | 654 (± 2) | 809 (± 2) | 654 (± 2) | ||
| H8 | mm | 3 | 3 | - | 3 | ||
| H9 | mm | 3 | 3 | 3 | 3 | ||
| See picture in | AR40.30-P-0402-02A | AR40.30-P-0402-02A | - | AR40.30-P-0402-02A | |||
TEST VALUES FOR DISTANCE AND COMPARISON MEASUREMENTS ON REAR AXLE
| Number | Designation | Model 203 | Model 208 | Model 209 | Model 210 | ||
|---|---|---|---|---|---|---|---|
| BE40.30-P-1001-05B | Dimension | H1 | mm | ± 2 | 4 | 4 | 4 |
| H2 | mm | ± 1,5 | 3 | 3 | 3 | ||
| H4 | mm | - | 4 | - | 4 | ||
| H5 | mm | ± 3 | 6 | 6 | 6 | ||
| H6 | mm | 1012 (± 2) | 1022 (± 2) | 1012 (± 2) | 1082 (± 2) | ||
| H7 | mm | 738 (± 2) | 654 (± 2) | 738 (± 2) | 714 (± 2) | ||
| H8 | mm | ± 1,5 | 3 | 3 | 3 | ||
| H9 | mm | ± 1,5 | 3 | 3 | 3 | ||
| See picture in | AR40.30-P-0402-02P | AR40.30-P-0402-02A | AR40.30-P-0402-02P | AR40.30-P-0402-02A | |||
TEST VALUES FOR DISTANCE AND COMPARISON MEASUREMENTS ON REAR AXLE
| Number | Designation | Model 211 | Model 215 | Model 220 | Model 230 | ||
|---|---|---|---|---|---|---|---|
| BE40.30-P-1001-05B | Dimension | H1 | mm | - | 4 | 4 | 4 |
| H2 | mm | 3 | 3 | 3 | 3 | ||
| H4 | mm | - | 4 | 4 | - | ||
| H5 | mm | 6 | 6 | 6 | 6 | ||
| H6 | mm | 1032 (± 2) | 1096 (± 2) | 1096 (± 2) | 1032 (± 2) | ||
| H7 | mm | 1036 (± 2) | 1085 (± 2) | 1085 (± 2) | 1036 (± 2) | ||
| H8 | mm | - | 3 | 3 | - | ||
| H9 | mm | 1175 (± 2) | 3 | 3 | 3 | ||
| See picture in | AR40.30-P-0402-02T | AR40.30-P-0402-02N | AR40.30-P-0402-02I | AR40.30-P-0402-02R | |||