Emission control, function - GF14.00-P-3000AM
ENGINE 113.990 in MODELS 211, 219
ENGINE 113.991 in MODELS 215, 220
ENGINE 113.992 in MODEL 230
ENGINE 113.993 in MODEL 463
ENGINE 113.995 in MODEL 230
The emission control system is divided into the following subsystems which are controlled and coordinated by the ME control unit:
- Lambda control
- Two-sensor control
- O2 sensor heater
- TWC heating up
- Secondary air injection
The task of the emission control system is to reduce the exhaust emissions of:
- nitrogen oxides (NOX )
- hydrocarbon (HC)
- carbon monoxide (CO)
| ME-SFI two-sensor control, function | GF07.61-P-3020AM | ||
| O2 sensor heater, function | GF07.61-P-3025AM | ||
| Self-adjustment of mixture formation, function | GF07.61-P-3030AM | ||
| ME-SFI TWC heating-up, function | GF07.61-P-3032AM | ||
| ME-SFI lambda control, function | GF07.61-P-4022AM | ||
| ME-SFI transmission shift delay, function | GF07.61-P-4023AM | ||
| Air injection, function | GF14.30-P-3012AM | ||
| Catalytic converter efficiency monitoring function | GF49.10-P-3033AM |