Remove/install outer sealing rail - AR72.10-P-1700E

MODEL 202, 210, 220, 240 

Illustrated on driver's door on model 202 

Fig 1: Identifying Outer Sealing Rail Components - Illustrated On Driver's Door On Model 202

	Remove, Install
1.1	Open crank window	Vehicles with mechanical window lift mechanism.
1.2	Open window	Vehicles with power windows.
2	Press trim strip (1) off of outer window ledge	Avoid damaging paint.	Figure
3	Press sealing rail (2) off of window shaft	Insert installation wedge directly next to clip.	Figure
4	Check retaining clips (3 and 5) and replace, if necessary	Clip (3) is riveted on. On models 202 and 210 the clip (3) can only be replaced after removing cover (6). Clips (5) are installed on window shaft.
5	Install in the reverse order

Special tools 

Fig 2: Identifying Installation Wedge (110 589 03 59 00)