Retrofitting door control module with memory unit - AN72.29-P-0001M

MODEL 220 with CODE (249b) Automatic dimming inside rearview and outside rearview mirror (driver) 

Fig 1: Identifying Door Control Module Components With Memory Unit (1 Of 2)

Fig 2: Identifying Door Control Module Components With Memory Unit (2 Of 2)

	Removal
1	Remove door control module
			AR72.29-P-1000M
2	Transfer inside mirror adjustment switch. Remove heated seat switch and install on new door control module.
	Installation
3	Clip door control module cover for memory switch (2) and left/right front door control module with memory switch (N69/1, N69/2) together.
4	Install left/right front door control module with memory switch (N69/1, N69/2) and door control module cover (2)
			AR72.29-P-1000M
5	Reassemble vehicle
6	Code control modules with STAR diagnosis
7	Check for proper function
8	When the scope of equipment is changed enter code or designation of the corresponding special equipment on the vehicle data card	Code 275