Removing and installing AIRmatic central reservoir - AR32.22-P-2017I

MODEL 220 except CODE (487) Active Body Control (ABC) 

Fig 1: Identifying Central Reservoir, Pressure Line Connection And Screw

	Remove/install
	Special information on AIRmatic		AH32.22-P-1000-02I
1	Drain AIRmatic system using Star Diagnosis	Do not deflate the suspension struts.
2	Undo bolt (arrow) on bumper
3	Remove lamp unit
4	Remove engine compartment paneling	Left front part only	AR61.20-P-1105M
5	Unscrew pressure line terminal (42a) on central reservoir (42)	Seal off the pressure line with a blind plug for the duration of the repair work If pressure line or its connection fittings are damaged:↓	*BA32.22-P-1002-03A
		Repairing AIRmatic pressure line connection	AR32.22-P-2001-02I
6	Unscrew bolts (42b) and remove central reservoir (42)		*BA32.22-P-1001-03A
7	Install in the reverse order
8	Fill AIRmatic system using Star Diagnosis
9	Check AIRmatic for leaks.		AR32.22-P-8100I

AIR SUSPENSION

Number	Designation		Model 220
BA32.22-P-1001-03A	Bolt of central reservoir to bracket	Nm	8
BA32.22-P-1002-03A	Pressure line of air suspension to central reservoir	Nm	5