LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2005 >> S500 Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - 215 & 220 Chassis >> Testing & Repair >> Remove/install rear suspension strut - AR32.25-P-1016 >> Remove/install rear suspension strut - AR32.25-P-1016MB

Remove/install rear suspension strut - AR32.25-P-1016MB

MODEL 220.175 /178 with CODE (Z07) Top protection 

Fig 1: Identifying Rear Suspension Strut Remove/Install Components (Model 220.175)
G04849371
REMOVINGINSTALLING Remove/Install     
NOTESInstallation  Replace self-locking nuts and bolts    
NOTES Special information on AIRmatic Model 220 AH32.22-P-1000-02I 
1 Reduce pressure in rear suspension struts. Diagnosis system STAR DIAGNOSIS
NOTESInstallation: 
During recharging, the wheels should never be in contact with the floor; refilling with the suspension compressed leads to destruction of the air bellows in the suspension strut (41).
Fill to 5 bar.
*WH58.30-Z-1048-13A 
2 Remove rear wheel    
REFER TO MAINTENANCE     AP40.10-P-4050Z
3 Remove spring link (72)   AR35.20-P-0114MB
4 Unplug damping unit connector (Y53x1/Y54x1).    
5 Remove cover (arrow) in rear shelf.    
6 Unscrew pressure line connection (41a). TORQUE SPECIFICATION
NOTES Residual pressure in strut up to 3.5 bar. If residual pressure valve is damaged, replace the strut (41).
IMPORTANT Plug the pressure line with blind plug for the duration of the repair operations. If pressure line or its connection fittings are damaged:↓
*BA32.25-P-1006-04B 
    Recondition AIRmatic pressure line connection. AR32.22-P-2001-02I 
7 Unscrew nuts (41b). NOTES Do not damage C-pillar paneling.
NOTESInstallation  : Fit nuts (41b) and tighten after filling the suspension strut in the ready to drive vehicle.
 
    TORQUE SPECIFICATION *BA32.25-P-1004-04B 
8 Remove suspension strut (41). NOTES Do not damage brake hose.
NOTES When installing new or used suspension struts (41), check their condition. ↓
 
    Check minimum installation length of suspension struts and if necessary: ↓ AR32.25-P-1017-02I 
REFER TO FORMS Dispose of suspension strut. Model 220 OS32.25-P-0122-01J 
9 Install in the reverse order    
10 Check AIRmatic for leaks.   AR32.22-P-8100I 
TORQUE SPECIFICATION STRUTS

Number Designation Model 220.025/026/028/063/065/067/070/073/074/075/125/126/128/163/165/167/170/173/174/175/176/178/179/875/878
BA32.25-P-1004-04B Nut, rear strut to body Nm 20
BA32.25-P-1006-04B Air suspension pressure line to rear air spring Nm 5
COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1048-13A STAR DIAGNOSIS diagnosis system, Compact Passenger Car 6511 1801 00