Removing and installing wind deflector - AR77.20-P-2500E

MODEL 202 with CODE (412b) Electric sliding/pop-up roof with CODE (414a) Electric glass sliding/pop-up roof 

MODEL 210 with CODE (414a) Electric glass sliding/pop-up roof 

MODEL 215 with CODE (414a) Electric glass sliding/pop-up roof 

MODEL 220 with CODE (414a) Electric glass sliding/pop-up roof 

Fig 1: Identifying Wind Deflector Components

	Removal, installation
1	Open sliding roof
2	Press wind deflector (1) down on one side, twist upward in direction of arrow on opposite side out of cutout for sliding roof until wind deflector (1) can be unhooked.	On previous version wind deflectors without vertical stop (4)
2.1	Press wind deflector (1) inward until vertical stop (4) is free, turn upward slightly in direction indicated by arrow and unhook.	Do not break off retaining lug (5 or 6)
3	Reinstall in opposite order