Removing and installing cover on sliding/pop-up roof - AR77.20-P-0500F

MODEL 210, 215, 220 with CODE (414a) Electric glass sliding/pop-up roof 

Fig 1: Identifying Sliding/Pop-Up Roof Cover Components - Model 210, 215, 220 With Code (414A)

	Removal, installation
1	Slide cover (2) to rear
2	Open sliding/pop-up roof approx. 10 cm
3	Remove trim strip (1)	Before pulling off trim strip (1) press off on outside with plastic wedge
4	Completely open sliding/pop-up roof
5	Push cover (2) forward, unhook sliders (3, 4) from slide rail and lift out cover	Press cover (2) to side while unhooking
6	Reinstall in opposite order