Retrofitting CD changer - AN82.64-P-0001N: Notes

MODEL 215.375 /376 /378 1# as of 1.9.02 with CODE (803) Model year 2003 with CODE (810) Sound system 

Fig 1: Identifying CD Changer Remove/Install Components

	Notes on fiber optic cable	Model 215 with code (819) 6-disk CD changer.	AH82.70-P-0001-02A
	Notes on D2B ring		AH82.70-P-0001-03MN
	Remove
	Risk of explosion  from explosive gas. Risk of poisoning and caustic burns  from swallowing battery electrolyte. Risk of injury  through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries	No fire, sparks, naked flames or smoking. Wear protective gloves, acid-resistant clothing and safety glasses. Pour battery electrolyte only into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
1	Disconnect battery ground line
			AR54.10-P-0003I
	Notes on battery	All models	AH54.10-P-0001-01A
	Notes on AGM battery		AH54.10-P-0002-01A
2	Remove coverings in trunk	Left side paneling. If a side lining is installed without access door for the CD changer, then it has to be replaced with one that has an access door.
			AR68.30-P-4600M
	Install
3	Expand fiber optical cable ring for component that is to be retrofitted		AN82.64-P-0001-05N
	Cover fiber optic cable	Do not kink or stretch D2B fiber optic cable.  Install cover caps on optical waveguide connector and equipment connection.	AR82.95-P-0005-01A
4	Retrofit CD changer in trunk		AN82.64-P-0001-04N
5	Fit remaining parts to vehicle	Steps 2 to 1
6	Conduct startup with STAR DIAGNOSIS
7	Check for proper function	See owner's manual.
8	Add special equipment entry to the vehicle data card and to online vehicle data card	6-disk CD changer (code 819).