Retrofitting CD changer - AN82.64-P-0001M: Notes

MODELS 220.025 /026 /028 /063 /065 /067 /070 /075 /083 /084 /125 /126 /128 /165 /167 /170 /175 /176 /178 /183 /184 1# as of 1.9.02 with CODE (803) Model year 2003 with CODE (810) Sound system 

Fig 1: Identifying CD Changer Remove/Install Components

	Notes on fiber optical cable	Model 220 with CODE (819) CD changer (6-disc).	AH82.70-P-0001-02A
	Notes on D2B ring		AH82.70-P-0001-03MN
	Remove
	Risk of explosion  from explosive gas. Risk of poisoning and caustic burns  from swallowing battery electrolyte. Risk of injury  through burns to skin and eyes from battery acid or when handling damaged leadacid batteries	No fire, sparks, open flames or smoking. Wear protective gloves, acid-resistant clothing and safety glasses. Pour battery electrolyte only into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
1	Disconnect battery ground line		AR54.10-P-00031
			AH54.10-P-0001-01A
	Notes on battery	All models	AH54.10-P-0001-01A
	Notes on AGM battery	Model 220.028 with code (450) Taxi version. Models 220.070/075/175/178/875/878 as of 1.1.01.	AH54.10-P-0002-01A
2	Remove coverings in trunk	Left side paneling. If a side wall paneling without access flap for the CD changer has been installed, this must be replaced with one with an access flap.
			AR68.30-P-4600M
	Install
3	Extend fiber optical cable ring for components to be retrofitted		AN82.64-P-0001-05M
	Cover fiber optical cable	Do not buckle or extend D2B fiber optical cable.  Install cover caps on optical waveguide connector and equipment connection.	AR82.95-P-0005-01A
4	Retrofit CD changer in trunk		AN82.64-P-0001-04M
5	Fit remaining parts to vehicle	Steps 2 to 1
6	Perform startup with STAR DIAGNOSIS.	Perform nominal/actual configuration.
7	Perform function check	See owner's manual.
8	Add special equipment to the vehicle data card and to the online vehicle data card	CD changer, 6-disc (code 819)