Measure front axle carrier (when removed) - AR40.30-P-0450I

MODEL 215, 220 / / / / / (except, 220.083 /084 /087 /183 /184 /187) 

Fig 1: Identifying Front Axle Carrier Measurement - Model 215, 220 / / / / / (Except, 220.083 /084 /087 /183 /184 /187)

	Remove/Install
1	Remove front axle		AR33.10-P-0100I
	Measuring
2	Set up Celette straightening bench modular members	See set-up diagram for Celette straightening bench.
3	Insert checking fixtures (see set-up diagram) in the mounting bores of the Celette straightening bench and secure	We recommend measuring the front axle carrier before or after straightening bench work on the vehicle in question.
4	Place rear axle carrier complete (with axle halves) or as an individual part on the checking fixtures rotated by 180° as shown	The adjuster pins (arrows) on the modular member must be inserted into the reference bores in the front-axle carrier.	*BE40.30-P-1001-08A