Removing and installing pneumatic pump for dynamic seat control - AR91.25-P-1580MB
MODELS 220.0 /1 as of 1.9.02 with CODE (433) Left dynamic seat, incl. multicontour seat with CODE (434) Right dynamic seat, incl. multicontour seat with CODE (803) Model year 2003
Fig 1: Identifying Pneumatic Pump For Dynamic Seat Control Remove/Install Components - Models 220.0 /1 As Of 1.9.02
| Remove/Install | |||
| 1 | Remove paneling in trunk | ||
| Models 220.026/028/063/070/073/075/083/087. Models 220.128/165/170/173/175/178/183/187. | AR68.30-P-4600M | ||
| 2 | Unclip bracket (3) and move away, and remove front foamed material shell (5) from pneumatic pump for dynamic seat control (M40/1) | ||
| 3 | Detach electrical connector (4) from pneumatic pump for dynamic seat control (M40/1) | ||
| 4 | Detach pneumatic lines (2) from pneumatic pump for dynamic seat control (M40/1) | ||
| 5 | Detach intake line (1) from pneumatic pump for dynamic seat control (M40/1) | ||
| 6 | Remove pneumatic pump for dynamic seat control (M40/1) with rear foamed material shell (5) from carrier shell | ||
| 7 | Install in the reverse order |