Remove/install sensor for side airbag/window airbag - AR91.60-P-0730M
MODEL 215, 220.0 /1
Shown on Model 220
Fig 1: Identifying Sensor For Side Airbag/Window Airbag Remove/Install Components - Shown On Model 220
| Remove/install | |||
| Risk of injury. Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units. | The airbag/emergency tensioning retractor control module and side airbags /window airbags sensors must be from the same manufacturer. | AS91.00-Z-0001-01C | |
| Important instructions for performing repair, body work and welding on vehicles with airbags or belt tensioner units | Model 203, 209, 211.004/ 006/ 016/ 061/ 065/070, 215, 220, 230, 240, 450.3/4. Model 463.244 /245 /247 /248 /249 /250 /254 /309 /322 /323 /332 /333. |
AH91.00-P-0002-01M | |
| 1.1 | Switch off ignition, withdraw ignition key | ||
| 1.2 | Switch off engine, remove transmitter key from vehicle | With keyless go code 889. |
|
| 2 | Remove rear seat cushion | MODEL 215. | AR91.12-P-1020N |
| Model 220 without electrically adjustable rear bench seat, code 223b or without electrically adjustable individual rear seats, with seat ventilation, heated seats and memory package, code 224c. | AR91.12-P-1020MA | ||
| Model /220 with electrically adjustable rear bench seat, code 223b. | AR91.12-P-1020M | ||
| Model 220 with electrically adjustable individual rear seats, with seat ventilation, heated seats and memory package, code 224c. | AR91.12-P-1020MB | ||
| 3 | Turn around sound deadening mat to the rear in the area of the sensors | ||
| 4 | Disconnect electrical coupling (1) on left side airbag and window airbag sensor (A53/1), right (A54/1) | ||
| 5 | Unscrew bolts (2, 2 each) | ||
| 6 | Install in the reverse order | ||
| 7 | Carry out diagnosis |