Remove/install belt buckle (front seat) - AR91.40-P-1515MB

MODELS 220.0 /1 as of 1.9.02 with CODE (803) Model year 2003 

Fig 1: Identifying Belt Buckle (Front Seat) Remove/Install Components - Models 220.0 /1 As Of 1.9.02

	Remove/install
	Risk of injury.  Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag unit with expulsion area on top, do not subject to temperatures above 100 °C. When working on these units, disconnect the power supply.	AS91.00-Z-0001-01A
	Instructions for performing repair, body work and welding on vehicles with airbags and ETR units	Models 203, 209, 211.004/006/016/061/065/070, 215, 220, 230, 240, 450.3/4. Model 463.244/245/247/248 /249 /250 / 254 /309 /322 /323 /332 /333.	AH91.00-P-0002-01M
	Evaluation of airbags and emergency tensioning retractors on accident vehicles	Models 129 as of 1.7.93, 163, 168, 170, 202 as of 1.7.93, 203, 208, 209, 210, 211.004/ 006/ 016/ 061/ 065/ 070, 215, 220, 230, 240, 414, 461, 463, 638, 901, 902, 903, 904,905. Models WD141, WD241, WD341, WD641, WD741, XD141, XD241, XD341, XD441, XD541, XD641, XD741, YD141, YD241, YD341, YD441, YD541, YD641, YD741.	AH91.00-P-0006-01B
	Legal regulations on handling and storing airbags and emergency tensioning retractors	Models 124, 129, 140, 163, 168, 170, 202, 203, 208, 209, 210, 211.004/ 006/ 016/ 061/065/ 070, 215, 220, 230, 240, 314, 316, 318, 414, 450.3/4, 461, 463, 638, 668, 670, 690.6, 901, 902, 903, 904, 905, 950, 952, 953, 954, 970, 972, 974, 975, 976. Models WD141, WD241, WD341, WD641, WD741, XD141, XD241, XD341, XD441, XD541, XD641, XD741, YD141, YD241, YD341, YD441, YD541, YD641, YD741.	AH91.00-P-0004-01A
1.1	Switch ignition off, withdraw ignition key
1.2	Switch off engine, remove transmitter card from the vehicle	With keyless go code 889. Keep transmitter key outside transmission range.
2	Remove front seat		AR91.10-P-1000MB
3	Unscrew nut (1) from seat belt buckle (2)	Bolt/nut on front seat belt buckle.	*BA91.40-P-1003-01A
4	Disconnect and expose wiring harness (3) with yellow connectors (see arrow and magnification) to left (N32/1) and right (N32/2) front seat adjustment control unit with memory and to 2-pin driver (X28/34) and front passenger (X28/35) seat buckle emergency tensioning retractor connector separation point
5	Remove seat belt buckle (2) with driver (R46) and front passenger (R46/1) buckle ETR (R46) from front seat	If seat belt buckle (2) with driver (R46) and front passenger (R46/1) buckle ETR is replaced, the defective part must be properly disposed of: ↓.
	Notes on disposal of airbags and emergency tensioning retractors		OS91.00-P-0001-01A
	Make ETR units unusable		AR91.40-P-0611A

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS