Remove/install belt buckle (front seat) - AR91.40-P-1515M

MODELS 220.0 /1 up to 31.8.02

Fig 1: Identifying Belt Buckle (Front Seat) Remove/Install Components - Models 220.0 /1 Up To 31.8.02

G04851874

	Remove/install
	Instructions for performing repair, body work and welding on vehicles with airbags and ETR units	Models 203, 209, 211.004/006/016/061/065/070, 215, 220, 230, 240, 450.3/4. Model 463.244/245/247/248/249/250/254/309/322/323/332/333.	AH91.00-P-0002-01M
1	Remove front seat		AR91.10-P-1000M
2	Open cable straps of seat belt buckle switch cable on underside of seat
3	Remove coupling (arrow) from left (N32/1) and right (N32/2) front seat adjustment control unit with memory
4	Unscrew seat belt buckle screw (2) and remove seat belt buckle (1)	Torque wrench.	Figure
		Bolt/nut at front seat belt buckle.	*BA91.40-P-1003-01A
5	Install in the reverse order

TORQUE SPECIFICATION

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 220
BA91.40-P-1003-01A	Screw/nut on front seat belt buckle	NM	30

Fig 2: Identifying Torque Wrench (001 589 66 21 00)

G04851875