Removing and installing sealing rail on outside - AR72.10-P-1700N

MODEL 215 

Fig 1: Identifying Sealing Rail On Outside Remove/Install Components

	Removal, installation
1	Completely open crank window
2	Unscrew screws (5) and remove cover (6)
3	Press off molding strip (1) with installation wedge	Insert installation wedge directly next to clip. Avoid damaging paintwork of paneling on mirror triangle	Figure
4	Press off sealing rail (2) with installation wedge	Check clamps (3), replace if necessary	Figure
5	Install in opposite order

Fig 2: Identifying Installation Wedge (110 589 03 59 00)