LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2005 >> ML500 >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System, Equipment & Instructions -- 163 Chassis >> Basic Knowledge >> Momentary and average fuel consumption, function - GF54.50-P-2005GH

Momentary and average fuel consumption, function - GF54.50-P-2005GH

MODEL 163 with CODE (245) Trip computer 

Momentary fuel consumption 

The momentary fuel consumption is displayed in either

The current fuel consumption is calculated from the distance traveled in a second and the quantity of fuel used during this second. The value is updated every second.

Fig 1: Display For Momentary Fuel Consumption Mile Per Gallon
G04607700

IMPORTANT When the engine is running and the vehicle is stationary, the maximum value (0 mi/gal or) 36 (previously 99.9) l/100 km) is displayed. When the vehicle is decelerating (inertia fuel shutoff) at rotational speeds of approx. 2000 rpm, the minimum value is displayed.

Fig 2: Display For Momentary Fuel Consumption Kilo Meter
G04607701

Average fuel consumption 

The average fuel consumption is displayed in either

The average fuel consumption is calculated from the distance traveled since the last reset and the quantity of fuel required to travel this distance. The display is updated every 3 seconds. Since this is an average value, the display reacts very sluggishly to changes in the driving conditions.

Data required to calculate fuel consumption 

The trip computer control module (TRIP, N41) requires the following information to calculate the momentary and average fuel consumption: