Deactivating anti-theft alarm (ATA), function - GF80.50-P-2003GH
MODEL 163 with CODE (551a) Anti-theft alarm (ATA)
The anti-theft alarm (ATA) is activated by:
- Unlocking the vehicle with the remote control key
- Inserting the remote control key into the ignition lock and turning into the radio position (circuit 15R)
In both cases the all-activity module (AAM) (N10) deactivates all alarm inputs. The ATA status indicator (E33) in the center console comes on for 10 s and then goes out.
Vehicles with Interior protection system and anti-towing sensor (AS) : The AAM sends a command to deactivate the interior protection system and anti-towing sensor to the trip computer control module (N41) .
Deactivation of the ATA leads to termination of any alarm triggered previously.
| Activating anti-theft alarm (ATA), function | GF80.50-P-2002GH | ||
| Unlocking with remote control key, function | GF80.20-P-3006GH | ||
| Interior motion sensor (IMS), function | GF80.50-P-2006GH | ||
| Towing sensor (TS), function | GF80.50-P-2007GH | ||
| All-activity module (AAM) position/task/ design/function | GF54.21-P-4100GH |