Bulb function check IC - AD54.30-P-3000-01A

Bulbs 

• Move starter switch to position "2", all indicator and malfunction indicator lamps illuminate.
• Start engine, all indicator and malfunction indicator lamps go out from an engine speed of approx. 480 rpm when the systems are functioning correctly
• The following lamps go out irrespective of engine speed:

  SRS MIL after approx. 4 seconds

  Seat belt reminder lamp after approx. 6 seconds , , , , , and Korea only)

If individual indicator/malfunction indicator lamps do not come on or come on during operation, the systems concerned are to be checked or if necessary the fluid levels corrected.