LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2005 >> E55 >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft - 211 Chassis >> Testing & Repair >> Remove/install propeller shaft - AR41.10-P-0050T >> Connect sections of propeller shaft - AR41.10-P-0050-05DA

Connect sections of propeller shaft - AR41.10-P-0050-05DA

REFER TO CAPACITIES & SPECIFICATIONS Long-life grease (NLGI grade 2) BB00.40-P-0266-02A
  1. Coat the splined profile with Molykote grease before assembly.
  2. Reconnect front and rear sections of propeller shaft. The humps on the front propeller shaft must be between the two humps on the linkage arm (arrows).

    IMPORTANT Ensure correct seat of rubber sleeve at large diameter.

    Fig 1: Identifying Humps On Linkage Arm (Propeller Shaft Without Clamp)
    G04715521
    Fig 2: Identifying Humps On Linkage Arm (Propeller Shaft With Clamp)
    G04715522
scientia non olet · About LEMON Manuals