Wiring diagram for backup camera control unit - PE54.65-P-2102-99FAA
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2013 Mercedes-Benz C63, 2012 Mercedes-Benz C63, 2011 Mercedes-Benz C63, 2011 Mercedes-Benz C350, and 2010 Mercedes-Benz C63. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 204.0/2/3/9 with CODE 218 (Rear view camera) with CODE 498 (Japanese version) Control unit N66/2
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Explanation of color codes | 15L |
| A40/3 | COMAND control unit | 12L |
| B84/3 | Backup camera | 5L |
| B84/3x1 | Backup camera electrical connector | 4J |
| CAN B | Interior CAN | 8K |
| N10/2 | Rear SAM control module with fuse and relay module | 2L |
| N10/2f84 | Fuse 84 | 1L |
| N66/2 | Reverse camera control module | 4A |
| N66/2 | Reverse camera control module | 12A |
| U57 | Valid for model 204.2 | 6D |
| U58 | Valid for model 204.0 | 3D |
| W18/3 | Left front seat crossmember ground point 2 | 2E |
| X169 | Backup camera electrical connector | 6G |
| X30/33 | Right vehicle floor interior CAN voltage distributor electrical connector | 8L |