Blind Spot Assist wiring diagram - PE54.71-P-2100-97FAA
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2013 Mercedes-Benz C63, 2012 Mercedes-Benz C63, 2011 Mercedes-Benz C63, 2011 Mercedes-Benz C350, and 2010 Mercedes-Benz C63. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 204.0/2/3 with CODE 234 (Blind Spot Monitoring) with CODE 476 (Automatic lane recognition)
MODEL 204.9 as of model year 2013 with CODE 234 (Blind Spot Monitoring)
with CODE 476 (Automatic lane recognition)
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 15L |
| B29/4 | Left rear bumper intelligent radar sensor | 9L |
| B29/5 | Right rear bumper intelligent radar sensor | 6L |
| CAN G | Front end CAN | 13K |
| N10/1 | Front SAM control unit with fuse and relay module | 13L |
| N10/2 | Rear SAM control unit with fuse and relay module | 3L |
| N10/2f59 | Fuse 59 | 2L |
| W7 | Right wheelhouse trunk ground point | 7B |
| X35/28 | Rear bumper PARKTRONIC electrical connector | 4E |
| Z36/17 | Rear sensor CAN connector sleeve | 10G |
| Z36/19 | Rear sensor CAN connector sleeve | 9G |
| Z36/35 | Rear radar sensors sensor power supply connector sleeve | 5G |
| Z36/36 | Rear radar sensors sensor ground connector sleeve | 7G |