220 589 01 99 00 Wiring harness repair kit - WS00.19-P-0009B
WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
FG 00/Set B
MODEL all
MODIFICATION NOTES
| 4.4.11 | Replaced by 220 589 02 99 00 Wiring harness repair kit | FG 00, FG 54/83/Set B | WS00.19-P-0002B |
| Part | 220 589 01 99 01 Fl. crimping set 6.3/2.8 | FG00/Set B | WS00.19-P-0001-01B |
| Part | 220 589 01 99 02 Crimp set for cable lugs | FG00/Set B | WS00.19-P-0001-02B |
| Part | 220 589 01 99 03 MCP 2.8 crimping set | FG00/Set B | WS00.19-P-0001-03B |
| Part | 220 589 01 99 04 MCP 2.8 crimping set | FG00/Set B | WS00.19-P-0001-04B |
| Part | 220 589 01 99 05 JPT crimping set | FG00/Set B | WS00.19-P-0001-05B |
| Part | 220 589 01 99 06 RK 2.5 crimping set | FG00/Set B | WS00.19-P-0001-06B |
| Part | 220 589 01 99 07 SLK 2.8 crimping set | FG00/Set B | WS00.19-P-0001-07B |
| Part | 220 589 01 99 08 SLK 2.8 crimping set | FG00/Set B | WS00.19-P-0001-08B |
| Part | 220 589 01 99 10 Crimp pliers | FG00/Set B | WS00.19-P-0001-09B |
| Part | 220 589 01 99 11 Positioner, Fl. 6.3/2.8 | FG00/Set B | WS00.19-P-0001-10B |
| Part | 220 589 01 99 12 Positioner, cable lug | FG00/Set B | WS00.19-P-0001-11B |
| Part | 220 589 01 99 13 MCP 2.8 positioner | FG00/Set B | WS00.19-P-0001-12B |
| Part | 220 589 01 99 14 MCP 2.8 positioner | FG00/Set B | WS00.19-P-0001-13B |
| Part | 220 589 01 99 15 Positioner, JPT | FG00/Set B | WS00.19-P-0001-14B |
| Part | 220 589 01 99 16 Positioner, RK 2.5 | FG00/Set B | WS00.19-P-0001-15B |
| Part | 220 589 01 99 17 Positioner, SLK 2.8 | FG00/Set B | WS00.19-P-0001-16B |
| Part | 220 589 01 99 18 Positioner, SLK 2.8 | FG00/Set B | WS00.19-P-0001-17B |
| Part | 220 589 01 99 20 Unlocking device with RK 1.5 ejector | FG00/Set B | WS00.19-P-0001-18B |
| Part | 220 589 01 99 21 Replacement sleeve, RK 1.5 | FG00/Set B | WS00.19-P-0001-19B |
| Part | 220 589 01 99 30 Unlocking device with RK 2.5 ejector | FG00/Set B | WS00.19-P-0001-20B |
| Part | 220 589 01 99 31 Replacement sleeve, RK 2.5 | FG00/Set B | WS00.19-P-0001-21B |
| Part | 220 589 01 99 40 Wire stripper | FG00/Set B | WS00.19-P-0001-22B |
| Part | 220 589 01 99 41 Reflector | FG00/Set B | WS00.19-P-0001-23B |
| Part | 220 589 01 99 42 Adapter | FG00/Set B | WS00.19-P-0001-24B |
| Part | 220 589 01 99 50 Blade holder with clamping pliers | FG00/Set B | WS00.19-P-0001-25B |
| Part | 220 589 01 99 51 MPT blade | FG00/Set B | WS00.19-P-0001-26B |
| Part | 220 589 01 99 52 RK 4.0 blade solder contact | FG00/Set B | WS00.19-P-0001-27B |
| Part | 220 589 01 99 53 RK 2.5 blade solder contact | FG00/Set B | WS00.19-P-0001-28B |
| Part | 220 589 01 99 54 MT 3 blade | FG00/Set B | WS00.19-P-0001-29B |
| Part | 220 589 01 99 55 E 95 blade | FG00/Set B | WS00.19-P-0001-30B |
| Part | 220 589 01 99 56 LSK 8 blade | FG00/Set B | WS00.19-P-0001-31B |
| Part | 220 589 01 99 57 Fl. blade 2.8 | FG00/Set B | WS00.19-P-0001-32B |
| Part | 220 589 01 99 58 Blade, Fl. 4.8/6.3 | FG00/Set B | WS00.19-P-0001-33B |
| Part | 220 589 01 99 59 MCP 2.8/Fl. blade 2.8 | FG00/Set B | WS00.19-P-0001-34B |
| Part | 220 589 01 99 60 MQS blade | FG00/Set B | WS00.19-P-0001-35B |
| Part | 220 589 01 99 61 JPT/SPT blade | FG00/Set B | WS00.19-P-0001-36B |
| Part | 220 589 01 99 62 SLK 2.8 blade | FG00/Set B | WS00.19-P-0001-37B |
| Part | 220 589 01 99 63 SLK 2.8 - 97 blade | FG00/Set B | WS00.19-P-0001-38B |
| Part | 220 589 02 99 70 empty case | FG00/Set B | WS00.19-P-0002-01B |
| Part | 220 589 01 99 71 Blade box upper section | FG00/Set B | WS00.19-P-0001-40B |
| Part | 220 589 01 99 72 Blade box lower section | FG00/Set B | WS00.19-P-0001-41B |
| Part | 220 589 01 99 74 Plastic can 151 x 99 x 44 | FG00/Set B | WS00.19-P-0001-42B |
| Part | 220 589 01 99 75 Plastic can 61 x 54 x 38 | FG00/Set B | WS00.19-P-0001-43B |
| Part | 220 589 01 99 76 Plastic can 53 x 37 x 24 | FG00/Set B | WS00.19-P-0001-44B |
| Part | 220 589 01 99 77 Adhesive labels | FG00/Set B | WS00.19-P-0001-45B |
| 202 589 03 33 00 Unlocking tool | FG54/Set B | WS54.00-P-0021B |
Use:
Wiring harness repair kit for repairs to individual lines, harnesses and connectors.
The following components for performing the repair are contained in the case:
- 2, 4 and 6-way terminal block (rapid connection technology)
- 10-way potential distributor
- Solder connector for line cross-sections up to max. 6 mm 2 (individual line)
- Contacts corresponding to the crimping sets