Testing and repair work: Passenger cars: Rear wall and rear end - AR64.00-Z-9209AA
WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 209
| Partially replace rear longitudinal member | MODEL 209.4 | AR64.20-P-1260QA |
| Remove/install rear crossmember | MODEL 209.4 | AR64.20-P-1100QA |
| Remove/install strut tower brace | MODEL 209 with CODE (P98) Black Series | AR64.20-P-0010QBS |
| Replace complete bottom rear center section | MODEL 209.4 | AR64.20-P-1000QA |
| Replace complete rear end | MODEL 209.3 | AR64.20-P-1020Q |
| Replace end section on rear longitudinal member | MODEL 209.4 When replacing rear fender and bottom rear center section | AR64.20-P-1240QA |
| Replace spare wheel well | MODEL 209.4 | AR64.20-P-1245QA |
| Replace support for rear cross member | MODEL 209.4 When replacing rear fender and wheelhouse | AR64.20-P-1230QA |
| Replace top rear center section | MODEL 209.4 | AR64.20-P-1040QA |
| Replace top rear crossmember for soft-top compartment | MODEL 209.4 | AR64.20-P-1150QA |