Install and weld in wheel well - AR62.20-P-1200-17P

WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Wheel Well Spot Weld (Area F)

Courtesy of MERCEDES-BENZ USA

Work procedure shown on model 203.0.

Fit wheel well and fasten with straightening tool and clamps.
Wheel well (area F).

Fig 2: Identifying Wheel Well Weld Areas (N, N1, O & O1)
Courtesy of MERCEDES-BENZ USA
Wheel well (area N and N₁ ).
Wheel well (area O and O ₁ ).

Fig 3: Identifying Wheel Well Weld Areas (H, H1, I, I1, J, K & L)
Courtesy of MERCEDES-BENZ USA
Wheel well (areas I, I₁ , J and K).
Wheel well (areas J₁ , H, H₁ and L).
Weld in wheel well with (area G).

Fig 4: Identifying Wheel Well Weld Area (G)
Courtesy of MERCEDES-BENZ USA

Fig 5: Identifying Wheel Well Weld Area (A, B, C, D & E)
Courtesy of MERCEDES-BENZ USA
Wheel well (areas A, B, C, D and E).